Product Code:SAE J1098
Title:Ton Kilometer Per Hour Application
Issuing Committee:Mtc8, Tire And Rim
Scope: This SAE Standard establishes the procedures for the application of Ton Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis. This document is applicable to only those tires used on earthmoving machines as defined in SAE J1057, and contains machines referenced in SAE J1116. The loads, speeds, inflations, and rim configurations are assumed to be within acceptable industry or manufacturer's prescribed recommendations. Other application parameters affecting tires are not included in the scope (for example: floating, cut, bruise, wear, etc.). These parameters must also be considered for final tire selection, since a tire that maximizes desirable TKPH characteristics will sometimes compromise these other parameters. The standards for the productivity of off-the-road machines to tires are not included in the scope. The formula (4.2 and 4.3) are applicable to transport type machines only (that is, trucks, tractor trailers, and scrapers) usinselection, since a tire that maximizes desirable TKPH characteristics will sometimes compromise these other parameters. The standards for the productivity of off-the-road machines to tires are not included in the scope. The formula (4.2 and 4.3) are applicable to transport type machines only (that is, trucks, tractor trailers, and scrapers) using category E Earthmover Service Code Tires. See SAE J751 for service codes.g category E Earthmover Service Code Tires. See SAE J751 for service codes.
Rationale: This SAE Standard establishes the procedures for the application of Ton Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis. This document is applicable to only those tires used on earthmoving machines as defined in SAE J1057, and contains machines referenced in SAE J1116. The loads, speeds, inflations, and rim configurations are assumed to be within acceptable industry or manufacturer's prescribed recommendations. Other application parameters affecting tires are not included in the scope (for example: floating, cut, bruise, wear, etc.). These parameters must also be considered for final tire selection, since a tire that maximizes desirable TKPH characteristics will sometimes compromise these other parameters. The standards for the productivity of off-the-road machines to tires are not included in the scope. The formula (4.2 and 4.3) are applicable to transport type machines only (that is, trucks, tractor trailers, and scrapers) usinselection, since a tire that maximizes desirable TKPH characteristics will sometimes compromise these other parameters. The standards for the productivity of off-the-road machines to tires are not included in the scope. The formula (4.2 and 4.3) are applicable to transport type machines only (that is, trucks, tractor trailers, and scrapers) using category E Earthmover Service Code Tires. See SAE J751 for service codes.g category E Earthmover Service Code Tires. See SAE J751 for service codes.
基本信息
标准名称: | 低速大扭矩液压马达 |
英文名称: | Lew speed kigh torque hydraukic motor |
中标分类: |
机械 >>
通用零部件 >>
液压与气动装置 |
ICS分类: |
流体系统和通用件 >>
流体动力系统 >>
泵和马达
|
替代情况: | 被JB/T 8728-2010代替 |
发布部门: | 全国液压气动标准化技术委员会 |
发布日期: | 1998-03-19 |
实施日期: | 1998-07-01 |
首发日期: | 1900-01-01 |
作废日期: | 2010-07-01 |
归口单位: | 全国液压气动标准化技术委员会 |
出版日期: | 1900-01-01 |
页数: | 15 页 |
批文号: | 机械科[1998]291号 |
适用范围
JB/T 8728-1998 本标准规定了内曲线径向柱塞马达、曲轴连杆径向柱塞马达、曲轴无连杆径向柱塞马达、径向钢球马达、双斜盘轴向柱塞马达等5种低速大扭矩液压马达的结构类型、试验方法、检验规则和标志、包装。 本标准适用于以液压油或性能相当的其它矿物油为介质的内曲线径向柱塞马达、曲轴连杆径向柱塞马达、曲轴无连杆径向柱塞马达、径向钢球马达、双斜盘轴向柱塞马达等5种结构类型的低速大扭矩液压马达。其它结构类型的低速大扭矩液压马达可参照使用。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 通用零部件 液压与气动装置 流体系统和通用件 流体动力系统 泵和马达