GB/T 12690.13-2003 稀土金属及其氧化物中非稀土杂质化学分析方法钼、钨量的测定电感耦合等离子体发射光谱法和电感耦合等离子体质谱法

作者:标准资料网 时间:2024-05-04 16:47:11   浏览:8982   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:稀土金属及其氧化物中非稀土杂质化学分析方法钼、钨量的测定电感耦合等离子体发射光谱法和电感耦合等离子体质谱法
英文名称:Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Determination of molybdenum and tungsten content—Inductively coupled plasma atomic emission spectrographi
中标分类: 冶金 >> 金属化学分析方法 >> 稀有金属及其合金分析方法
ICS分类: 冶金 >> 有色金属 >> 其他有色金属及其合金
发布部门:中华人民共和国国家质量监督检验检疫总局
发布日期:2004-06-01
实施日期:2004-06-01
首发日期:2003-11-18
作废日期:1900-01-01
主管部门:国家发展和改革委员会
归口单位:全国稀土标准化技术委员会
起草单位:包头稀土研究院
出版社:中国标准出版社
出版日期:2004-06-01
页数:8页
适用范围

本方法规定了金属镧、金属铈、金属镨、金属钕、金属钐、金属铕、金属铽、金属钆、金属钇中钼、钨含量的测定方法。本方法适用于镧、金属铈、金属镨、金属钕、金属钐、金属铕、金属钆、金属铽、金属镝、金属钇中钼、钨含量的测定。测定范围(质量分数):钼0.010%~0.50%;钨0.010%~0.50%。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 金属化学分析方法 稀有金属及其合金分析方法 冶金 有色金属 其他有色金属及其合金
下载地址: 点击此处下载
【英文标准名称】:TestforDeterminingMagneticContentofAbrasiveGrains
【原文标准名称】:磨粒磁性测定试验
【标准号】:ANSIB74.19-2002
【标准状态】:现行
【国别】:美国
【发布日期】:2002
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:UAMA(ASCB74)
【标准类型】:()
【标准水平】:()
【中文主题词】:研磨粉;磨料;含量测定;磁粉粒;磁粉探伤;粉末;试验
【英文主题词】:Abrasivepowders;Abrasives;Determinationofcontent;Magneticparticles;Magnetic-particleflawdetection;Powder;Testing
【摘要】:Thepurposeistoestablishanationallyrecognizedbasisfordeterminingthemagneticcontentofabrasivegrainusedinthemanufactureofgrindingwheels,coatedabrasiveproducts,generalpolishing,andotherindustrialusessuchaspressureblasting,
【中国标准分类号】:J43
【国际标准分类号】:25_100_70
【页数】:
【正文语种】:英语


Product Code:SAE AS429
Title:Rate of Climb (Vertical Speed) Indicator, Pressure Actuated (Turbine Powered Subsonic Aircraft) (NONCURRENT Nov 1996)
Issuing Committee:A-4 Aircraft Instruments Committee
Scope:This Aerospace Standard establishes essential minimum safe performance standards for pressure actuated Rate of Climb (Vertical Speed) Indicators primarily for use with turbine powered subsonic transport aircraft, the operation of which may subject the instruments to the environmental conditions specified in Section 3.3. This Aerospace Standard covers four basic types of direct reading pressure actuated rate of climb (vertical speed) indicators as follows: TYPE I - Range 0-2000 feet per minute climb and descent, TYPE II - Range 0-3000 feet per minute climb and descent, TYPE III - Range 0-4000 feet per minute climb and descent, TYPE IV - Range 0-6000 feet per minute climb and descent.